617 nm visible LED 0 - 300 mm (UPC/EAN 100 Percent, PCS: 90 Percent) 330 scans per second 0.1 mm (4 mil) (0.07 mm actually) (Code 39, PCS: 90 Percent), More than 100 mm on 0.125 mm barcode Min. 30 Percent at UPC/EAN 100 Percent Programmable tone and beep time Keyboard, RS-232C, HID USB, USB virtual COM port, Wand Field Replaceable, Standard 2.0M Straight EMC: CE and FCC DOC Compliance, VCCI, BSMI Barcodes Code 39, Code 39 Full ASCII, Code 32, Code 128, UCC/EAN-128, Codabar, Code11, Code 93, Standard 2 of 5, Industrial 2 of 5, Interleaved 2 of 5, China Postal Code, IATA, UPC/EAN/JAN, UPC/EAN/JAN with Addendum, Telepen, MSI/Plessey, GS1DataBar (RSS) Linear, Linear-stacked Input Voltage: 5 V DC +/- 5 Percent, Operating Current: 100 mA typical Operating: 0 Degree C - 50 Degree C (32 Degree F - 122 Degree F), Storage: -20 Degree C - 60 Degree C (-4 Degree F - 140 Degree F) 5 Percent - 95 Percent RH (non-condensing) 0 - 10000 Lux

Designed to withstand 1.5 M drops Aim and Shoot Trigger - Gives operational comfort and reduces fatigue especially in peak hours; Durable and Strong Design - Designed to with stand multiple drops from a height of 5 feet; (L x W x H): 152.3 x 64.4 x 104.9 mm (device only) 120 g (device only) Flaunting the technologically advanced Ultrascan technology, the TVS BS-C 101 Star Barcode Scanner is an electronic device that can read and output printed barcodes to a computer. Like a flatbed scanner, it consists of a light source, a lens and a light sensor translating optical impulses into electrical ones. Lightweight at just 181 grams and with user-friendly dimensions of 24.6 x 9.7 x 7.9 cm, the device provides effortless comfort of usage. Additionally, like nearly all barcode readers, it contains a decoder circuitry analysing the barcode image data provided by the sensor and sending the barcode's content to the scanner's output port. This Barcode Scanner is suitable for a wide range of applications, from retail checkout and inventory management, to invoicing in offices and shipping receiving control in factories.  

It is enabled with auto sense technology making it convenient to use in Hands free mode. The TVS BS-C 101 Star Barcode Scanner has a scan angle of 45 degrees and a scan rate of 330 scans per second, which is the highest among its competitors. Empowered with Ultra scan decoding technology it can decode a majority of 1D barcodes as well as GS1 Data Bar. It supports auto scan mode and with an optional stand can work as a hands free scanner. It also features an impressive 32 bit microprocessor, which guarantees an unbeatable scan rate and decoding accuracy. High connectivity features as this bar code from TVS is detailed to work with a varied options of System Interfaces such as Keyboard, RS-232C, HID USB, USB virtual COM port and Wand types. The device has a corded Power Source and a depth of field of up to 300 mm, it is also enabled to decode from larger distances The TVS BS-C 101 Star Barcode Scanner comes with an Aim and Shoot Trigger that gives you operational comfort and reduces fatigue, especially during peak hours.

Durable and strong, it is designed to withstand multiple drops from a height of 5 feet almost. With a high resolution of 2500 pixels, this Barcode Scanner is crafted with lower PCS pixels that even decodes faded barcodes. sharp kc-850u air purifier / humidifierThis TVS Barcode is suitable for a wide range of applications, from retail checkout and inventory management, to invoicing in offices and shipping receiving control in factories.winix air purifier 9500 manual 300 - 400 scans/secclean oreck proshield plus air purifier 454FTB Insertion Mass Flowmeter (Single Point) The Series 454FTB represents the newest addition to the Kurz Family of state-of-the-art microprocessor based industrial quality, Single-Point Insertion Mass Flow Transmitters for industrial gas flow measurement.

The 454FTB includes the most advanced microprocessor technology, real time sensor and electronics diagnostics, temperature compensation, highest repeatability, accuracy and reliability available. The process pressure rating is up to 300 PSIG, the process temperature rating is -40 to 260°C and -40 to 500°C, the velocity range is 0-24,000 SFPM. FD2-HT Sensor rated at 260°C, HHT at 500°C Flow control valve PID controller Digital Thermal anomometer bridge (Patent pending) Convenient remote electronic mounting configuration One-piece PCB for improved reliability Built-in sensor cleaning purge timer External imput for other process signals CE Compliance, non-incendive hazardous gas safety approvals and CRN for most applications Online  —  Air Products celebrated this month the rollout of the first completed Liquefied Natural Gas (LNG) heat exchanger manufactured at its new production facility in Manatee County, Florida, a 300,000 square foot space that doubles the company’s manufacturing capacity.

“I am proud to say that no one in the world builds coil wound heat exchangers as large as we do. The largest LNG plants in the world use our technology. We needed a second manufacturing location, which would eliminate any transportation limitations regarding product size,” said Sandy McLauchlin, general manager of LNG and cryomachinery engineering and manufacturing at Air Products. Knowing the Difference can Save a Life Online — Lightning Facts Lightning strikes injure over 240,000 people each year across the world and ranks in the top 3 for weather related deaths in the U.S.; making lightning facts important information to be familiar with. People outdoors are the most at risk, but those indoors can be struck as well. In the U.S., fishing and […] Using a FLIR T420 Thernal Infrared Imager Meer, Belgium  —  FLIR Systems announces a new applications article that describes how leading Dutch embedded electronics specialist, 3T, is using a FLIR thermal imaging camera to detect hot spots of less than 125 x 125 microns in size that may indicate a Printed Circuit Board (PCB) component is likely to fail.

When something goes wrong in a PCB, whether it is improper soldering of a circuit or a failing component, the PCB will heat up locally. Therefore, thermal imaging offers a very good way to diagnose problems in the design phase of a PCB, to test it before it is supplied to a customer or in the qualification stage to locate hot spots from local heating. The traditional alternative to using thermal imaging for fault diagnosis in PCB electronics has been use of thermocouple contact sensors. Online — The process of cultivation leading to the target properties of new cereal varieties is time-consuming due to the need to characterize a large number of potential gene resources (Fig.). Genetic resources of minor cereals are tested in three-year seed-beds with elementary evaluation (ŠZH) according to the applicable methodology of work with collections of genetic resources (GZ). The genetic resources evaluated (GZ) include winter and spring wheat, winter barley, both forms of triticales, vain types of Hordeae and a number of minor crops.

Availability of modern technologies of thermographic imaging from the UAV platform (Unmanned Aerial Vehicle) offers new possibilities for description of genetic resources (GZ), extension of the range of classifiers, in terms of thermal behaviour of plants in relation to transpiration response of plants. Online — MadgeTech is excited to announce the release of the new, versatile CF200 canning fixture, designed to help food processors and manufacturers comply with FDA regulations. The CF200 is ideal for securing a variety of data logger probe sizes and styles used to monitor internal can and container temperatures for a wide range of foods, validating the product is free of microorganisms and ready to eat. Law requires canned food be heated to 121 °C (250 °F) to destroy microorganisms and inactivate enzymes, then vacuumed sealed to prevent any bacteria from getting in. According to the USDA, this process allows high-acid canned foods (fruits, tomatoes) to be stored for up to 1 ½ years, and low-acid canned good (vegetables, meat, fish) up to 5 years.

Operates on the thermal anemometer principle Engerwitzdorf, AUSTRIA  —  The new, compact EE741 in-line flow meter measures accurately the consumption of compressed air and technical gases; e.g. nitrogen, oxygen, helium, CO2 or argon. Thanks to the modular design, one and the same transmitter can be used for three different pipe diameters (DN15, DN20, DN25). To do so, the transmitter is simply combined with the appropriate gauge mounting block. Duisburg, Germany  —  The ultrasonic flowmeter OPTISONIC 3400 is now available with heat meter approval according to MID 2014/32/EU Annex VI MI-004 (and harmonized CEN EN1434, OIML R75) in accuracy classes 1, 2 and 3. Target applications include district heating networks, commercial and industrial heat metering applications as well as energy and utility applications in combined heat and electricity generation. OPTISONIC 3400 is the only inline heat meter that provides high accuracy measurement of heated water with three ultrasonic paths throughout the whole diameter range DN25…

SOMMER Messtechnik to showcase its new IDS-10 sensor at Meteorological Technology World Expo in Madrid Koblach, Austria — Ice can jeopardise the safety and a smooth operation of a range of technical equipment housed externally. It can also effect the (moving) parts itself once it covers buildings, machinery or other constructions exposed to weather including wind power stations, aviation and road traffic control towers, antennas, high-voltage power lines or other civil constructions. The  IDS-10 sensor was developed to tackle this problem. The new IDS-10 ice sensor automatically detects icing on its surface on a real-time and reliable basis, and is able to detect the different physical characteristics air, water and ice have at different frequencies. The  IDS-10 ice sensor now provides enhanced information about current environmental conditions and empirical data about ice formation, via continuous and automated measuring. It helps to support the decision-making process, reducing operational risk and costly maintenance work.